Shop by Piercing Placement

Shop by Piercing Placement

Every placement we stock, with the jewellery that actually fits it. The metal is implant-grade ASTM F136 titanium throughout — solid titanium, not a plating over brass or steel — so it is nickel-free. Plain and anodised pieces are safe in a piercing that is still healing; the gold, rose gold and black pieces carry a PVD film and are better kept for a healed one.

Placement is the only question that matters when you are buying. A 16G curved barbell that is perfect for a rook will not sit in a lobe, and a 20G nose hoop is too fine for a navel. Pick the spot below and you only see what belongs there.

Ear placements

Not sure which name belongs to which spot? The ear piercing chart maps all thirteen ear placements on a single diagram, with healing times.

Nose placements

Body placements

Shop by jewellery type

If you already know the placement and want a particular shape, start here instead.

Which gauge and length fits where

Gauge is wire thickness and it runs backwards: a higher number is thinner. Length and diameter are measured in millimetres. The figures below are the common fit — your piercer may have used something different, and the jewellery already in the hole is the only reliable guide.

Placement Usual gauge Usual size What fits
Lobe 18G–16G (1.0–1.2 mm) 6–8 mm post Flat back stud, huggie, small hoop
Helix 16G (1.2 mm) 6–8 mm post / 8–10 mm hoop Flat back stud, seamless ring, clicker
Flat 16G (1.2 mm) 6–8 mm post Flat back stud only
Conch 16G (1.2 mm) 8–10 mm post / 10–12 mm hoop Flat back stud, wide clicker, large hoop
Tragus 16G (1.2 mm) 6–8 mm post Flat back stud, short bar
Daith 16G (1.2 mm) 8–10 mm diameter Hinged clicker, seamless ring
Rook 16G (1.2 mm) 8–10 mm bar Curved barbell, small ring once healed
Nostril 20G–18G (0.8–1.0 mm) 6–8 mm post / 8 mm hoop Nose stud, fine seamless hoop
Septum 16G (1.2 mm) 8–10 mm diameter Clicker, horseshoe, seamless ring
Navel 14G (1.6 mm) 10 mm curved bar Curved barbell / bananabell
Still healing? Stay with a flat back stud or a clicker in solid titanium, and leave the dangles and the long bars until the piercing is fully settled. Cartilage takes six to twelve months, not six weeks — even when it stops hurting after two.

Placements we do not stock yet

We would rather say so than send you to an empty page. There is nothing in the catalogue right now for these:

Forward helix Anti-tragus Snug Orbital Industrial High nostril Bridge Eyebrow Medusa Labret & lip Tongue Nipple Dermal anchors

Several of these take the same 16G titanium bars and rings we already stock — a forward helix takes the same flat back stud as a helix, and an anti-tragus takes the same short bar as a tragus. If you are shopping for one of them, the cartilage range is the right place to look, and ask us if you want a size checked before you buy.

Common questions

How do I know what gauge my piercing is?
The jewellery currently in it is the answer. If you still have the piece your piercer fitted, measure the bar thickness with callipers, or ask the studio — they record it. Guessing and going thinner is the mistake to avoid: a thinner bar lets the channel shrink, and you cannot always get back up a size without a re-stretch.
Can I put ear jewellery in a nose piercing?
Sometimes, but check the gauge first. Most nostril piercings are 20G or 18G and most of our ear jewellery is 16G, which is thicker. Forcing a thicker bar through is a stretch, not a jewellery change. Septum piercings are usually 16G, so septum and daith jewellery genuinely are interchangeable — which is why you will see the same clickers listed under both.
Why is everything titanium rather than gold or steel?
ASTM F136 titanium heads the Association of Professional Piercers' list of materials appropriate for an unhealed piercing, and it is nickel-free by specification. That list is short but it is not one item long — it also admits ASTM F1295 and F67 titanium, ASTM F138 steel, niobium, solid 14k-and-above nickel-free gold, lead-free glass and PTFE. What it excludes is plated jewellery, where a coating sits between your tissue and an unspecified base metal. Surgical steel is a separate problem: 316L is 10 to 14 percent nickel by composition. We go into the difference in detail in anodised vs PVD vs plated titanium.
Are the coloured pieces coated?
It depends on the colour. Blues, purples, fuchsia and bronze are anodised: current is passed through the titanium itself, thickening its own oxide layer until it refracts light as colour. Nothing is added, so nothing can flake off. Gold, rose gold and black are a PVD finish — a thin ceramic film bonded onto the same ASTM F136 titanium. PVD is far tougher than plating, and what matters most is what sits underneath it: implant-grade titanium, not an unspecified base metal. But it is a film, and films abrade, so heavy daily wear will dull it over years. For a piercing that has not healed, choose plain or anodised titanium — PVD is not on the Association of Professional Piercers' initial-jewellery list. The full comparison is in anodised vs PVD vs plated titanium.
How many pieces can I buy for one new piercing?
Buy one to wear now and one to change into later, and that is plenty. Changing jewellery repeatedly in the first months is one of the more common reasons a cartilage piercing gets irritated, so a wardrobe is something to build after it has healed, not before.

Related reading: ear piercing chart · daith piercing guide · piercing gun vs needle · anodised vs PVD vs plated titanium